検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年
検索結果: 4 件中 1件目~4件目を表示
  • 1

発表形式

Initialising ...

選択項目を絞り込む

掲載資料名

Initialising ...

発表会議名

Initialising ...

筆頭著者名

Initialising ...

キーワード

Initialising ...

使用言語

Initialising ...

発行年

Initialising ...

開催年

Initialising ...

選択した検索結果をダウンロード

論文

Development of numerical simulation method of natural convection around heated porous medium by using JUPITER

上澤 伸一郎; 山下 晋; 柴田 光彦; 吉田 啓之

Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 9 Pages, 2023/05

福島第一原子力発電所の廃炉における汚染水対策として、注水低減,間欠注水,空冷が検討されている。しかし、格納容器内には燃料デブリの不確実性があるため、燃料デブリの分布状態や燃料デブリ取り出し作業の進捗状況に応じて、最適な冷却方法を事前に検討する必要がある。そのため我々は、燃料デブリの位置,発熱,気孔率の影響を含む空冷中の熱挙動を推定する方法の開発を進めている。多孔体と考えられる燃料デブリの内部構造をモデル化した上で大規模な熱流動解析を行うことは困難であることから、JUPITERに多孔体モデルを追加することにより多孔体の熱流動の解析を可能にした。本研究では、多孔体モデルを導入したJUPITERの妥当性検証結果について報告するとともに、多孔体の伝熱モデルについて直列,平行,幾何平均モデルのどのモデルが最も有効かについて議論する。多孔体周辺の自然対流の検証データについては、多孔体を含む系における自然対流の伝熱流動実験を独自に行った。実験と各モデルでの数値解析と比較を行ったところ、幾何平均モデルを用いた数値結果が実験結果に最も近い結果を得られた。しかしながら、定量的には温度と速度ともに実験結果よりも過大評価しており、特に、多孔体と空気との境界付近の温度は、より過大評価していることを確認した。

論文

A Numerical simulation method to evaluate heat transfer of fuel debris in air cooling by JUPITER, 2; Validation of porous model for natural convective heat transfer

上澤 伸一郎; 山下 晋; 柴田 光彦; 吉田 啓之

Proceedings of 12th Japan-Korea Symposium on Nuclear Thermal Hydraulics and Safety (NTHAS12) (Internet), 8 Pages, 2022/10

Various types of cooling of fuel debris such as reduction in the amount of water injection, intermittent injection water and air cooling are considered for contaminated water management in the decommissioning of Fukushima Daiichi Nuclear Power Station (NPS). As a method for estimating the thermal behavior of fuel debris in the preliminary containment vessel (PCV) of Fukushima Daiichi NPS, JAEA develops a method for estimating the thermal behavior in the air cooling, including the influence of the position, heat generation, and the porosity of fuel debris by JUPITER added a porous model. In order to validate the natural convective heat transfer analysis with porous bodies by the JUPITER added the porous model, the heat transfer and the flow visualization experiments of air natural convection with a porous body was performed in this study. The temperature distributions of the heat transfer surface, the natural convection area and the porous body were measured with thermocouples. In addition, the flow visualization was performed by a particle image velocimetry (PIV). We compared the temperature and flow results between the experiment and the numerical analysis. The temperature distributions at the central axis were generally agreed on the condition without the porous body. As for with the porous body, the tendency to increase the temperature inside the porous body was reproduced as in the analysis, but quantitative differences were observed. For the flow distribution of the test vessel, flow along the experimental vessel wall to form a vortex was observed in the experiment. On the other hand, an upward flow occurred from the center of the heating surface, and the flow was separated by the ceiling to form two vortices in the numerical analysis. The difference between the analysis and the experiment indicates that discussions for various thermal conductivity models to porous bodies is necessary.

論文

Transient behaviors of gas in thermal insulation media at rapid depressurization

松本 暢彦*; 時枝 潔*; 岡本 芳三; 越後 亮三*; 宮 健三*

Journal of Nuclear Science and Technology, 16(10), p.732 - 740, 1979/10

 被引用回数:1

多目的高温ガス実験炉には、高温断熱システムが多く用いられている。本報では、この断熱システムを対象に、冷却材急速減圧時に示す層内に介在する気体の非定常挙動を解析により求めた。高温断熱システム構造は、断熱材と気体が充填された容器内から外部へ気体が噴出する単純な1次元モデルにおきかえることができる。そこで、この1次元モデルに基づき、急速減圧時に示す層内気体非定常挙動を層内流動はダーシー法則に従うものとし、連続あるいは運動の式から求めた。パラメータはオリフィス開口比そして断熱層透過率であり、これらのパラメータが層内気体の非定常挙動に及ぼす影響を明確にした。また、急速減圧実験を実施し、解析モデルにより、高温断熱層内気体の非定常挙動が表されることを確認した。

口頭

空冷時における燃料デブリ熱挙動推定技術の開発,6; 原子炉格納容器内熱挙動解析における有効熱伝導率モデルの影響

上澤 伸一郎; 小野 綾子; 山下 晋; 吉田 啓之

no journal, , 

多孔質体と考えられている、東京電力福島第一原子力発電所のPCV内燃料デブリの熱挙動を推定するため、JUPITERを用いた空冷時における燃料デブリ熱挙動解析手法の開発を進めている。前報までは、多孔質体モデルを追加したJUPITERの妥当性確認や東京電力福島第一原子力発電所2号機PCV内の予備解析結果について報告した。本報では、多孔質体モデルにおける有効熱伝導率モデルの違いがPCV内熱挙動へ与える影響について報告する。本解析結果から、モデルの違いにより燃料デブリの温度や流速分布が異なり、燃料デブリの除熱量が大きく異なることが確認された。このことから、PCV内の熱挙動を推定するためには、燃料デブリ等の多孔質体としての内部構造の把握と、それに応じたモデルの適切な選択が必要である。

4 件中 1件目~4件目を表示
  • 1